PreDCR Layer Information:

Layer name Description   Naming Convention short command
_Additional details Any additional details apart from details provided on all other PreDCR layers can be drawn on this layer. These details may not be necessary for actual scrutiny process but can be used as additional supporting information.   ADAT
_Amalgamation Draw a continuous poly around the plots you want to amalgamate. Amalgamation contains more than one plot amalgamated together.
All entities having amalgamation as their container entity should be uniquely present in each amalgamation.
I.e. suppose there is a road widening in the Plot then the poly of road widening should be different for each amalgamation. (For amalgamation, draw plot 1, plot 2, plot 3 on plot layer and amalgamated plot AmalPlot 1, on amalgamation layer overlapping plot 1.)
  AMLG
_Amenity Draw Amenity space as a closed polyline which is reserve for utilities, services and conveniences.     AMN
_ArchProj This layer is used to represent various Architectural Projections in your Plan. Draw a closed Polyline for Architectural Projections. And mark it using Mark->Projection from PreDCR menu, according to requirements. Canopy/porch will come in plot & other projections will come with floor plans.   Mark -> Projections -> Chajja   AP
_Balcony Draw a balcony as a closed polyline which is a horizontal projection including parapet to serve as a sitting out place. Name of balcony must be inside and on _Balcony layer.     If Balcony is Enclosed Than Mark -> Balcony -> Enclosed Balcony   BL
_Building Building is used to group all floor plans of the same building.   Draw a closed poly enclosing all the floor plans and section of the same building on _Building layer. Note: As written above, dimension or area of this building poly has no meaning in AutoDCR. This is just an logical group of all floors of the same building. If the building plans of multiple PWorks or wings are same then building name shall be as given aside.     Naming Convention will be provided by Tool>Assign Name A (Bldg.Name) inside Bldg.Poly & A-1 (Bldg.Name) inside Pwork Poly BLD
_BLDGBLOCK    ( In layout )     BLDBLK
_CarpetArea Draw carpet area as a closed polyline which is a net usable floor area within a building excluding that covered by the walls or any other areas specifically exempted from floor space index computation in these regulations.   If Carpetarea is Splitted Mark-> CarpetArea-> Splited Tenement. & In Case of Slum Deve.— Mark-> CarpetArea-> Slum Development-> Sale or Rehab   CPT
 _Chowk Draw a chowk as a closed polyline which is an enclosed space permanently open to the sky within a building at any level. From chowk we take ventilation for habitual rooms   CWK
_CommFSI Draw a CommFSI as a closed polyline which is the area covered by a building on all the floors. This FSI polyline mainly used for commercial use bldg.   No need to give name on this layer. CMFS
_CompoundWall Closed polyline of compound wall to be drawn on this layer overlapping plotBoundary   1.5m high compound wall CW
_Door Door is a closed Polyline Which is drawn on “_Door” layer. Also you can insert a particular size poly for Door using Insert->Door from PreDCR menu.     Insert-> Door DR
_Electline         Electric line will be present in the layout plan and shall pass through plot entity as a non closed polyline.    Name electric line shall start with its voltage capacity and text insertion point shall lie on its polyline.   33 KV High Tension Line L1
_ExStructure Draw a Exstructure as a closed polyline which is a building or structure existing authorized before the commencement of these regulation. And mark it using Mark -> Existing structure as ‘To be demolished’ or ‘To be retained’.   Mark-> Existing Structure-> To be Demolished    OR  To be Retained      ES
_Floor Floor poly should be drawn as a closed Polyline with Text on same Layer. This is just a logical Group of all floor Entities.            Floor Name: Floor Plan will be automatically link with Section by matching the Floor Name. Hence all names to be given using <Assign Name> function Naming Convention will be provided by Tool>Assign Name>Floor name   Name of  floor should be in given format: TYPICAL-1,4 FLOOR PLAN TYPICAL-1-5 FLOOR PLAN TYPICAL-2&3 FLOOR PLAN Ground Floor Plan FLR
_FloorInSection FloorInSection poly will represent each floor section with its name inside Floor In Section. Floor Plan will be automatically link with FloorInSection by matching the Floor Name. If the Floor Plan is Typical Floor Plan, It should be Named with Proper Naming Convention. To avoid errors , give names for FloorInSection using <Assign Name> function   Inside FloorInSection: SECOND FLOOR, THIRD FLOOR, GROUND FLOOR. SECF
_GroundLevel The Ground level line should be drawn as an open polyline in the section poly.Prop.Ht. will be considered from GroundLvl Polyline. No need to give name on this layer. GL
_IntDPRoad Draw each Internal D.P. Road (road shown in development plan) as a closed Polyline.   12.0m wide int.DP road R3
_IndFSI Draw a closed FSI Polyline, which is used as a Industrial Purpose.   No need to give name on this layer. IFSI
_InternalRoad   Draw each Internal Road as a closed Polyline with Centre Line (Ltype-CentreLine) & single text inside it.   7.50 m wd. Internal Road R2
_Lift   Draw a Lift as a closed polyline which is a mechanically guided car, platform or transport for persons and materials between two or more levels in a vertical or substantially vertical direction  Fire Lift means a special lift designed for the use of fire service personnel in the event of fire or other emergency.   Naming Convention will be provided by Tool<Mark>Lift   If fire lift are provided then use the marking of “Fire lift” option from Mark -> Lift -> Fire Lift .   LFT
_Locationplan   Location plans if any to be drawn on this layer. This is only for reference. No verifications are done by AutoDCR for this layer so not compulsory.     LCP
_Marginline Margin Polylines will be created by PreDCR by using Tool “Mark>Margins” (User need not do anything on this layer.)     L3
_MainAccessRoad     Draw Main Access Road as a closed Poly with Text, which should be abutting with the Plot closed Poly. (Note: Road width must be written at the starting of Text)   24.00 m wd. Main Road R1
_Nala Draw centre Line of Nala as an open Polyline on this layer. Name of the poly should contain width of the Nala     R4
_NDZ No Development zone area if any inside plotBoundary to be drawn on this layer. And it should be drawn inside the plot with text on _NDZ layer.      
_NotInPossession Draw a closed Polyline on “NotInPossession” layer. If there in any Encroachment Area in Plot, it should be drawn as a closed Polyline with Text inside same Layer. It should be inside the plotBoundary.     NIP
_NetPlot No need to draw NETPLOT. This layer is not provided for PreDCR users.. No need to give name on this layer. NPLT
_Parking Draw a closed Polyline for Parking on “_Parking” Layer. You can also use Insert function to insert desired Parking Poly in your drawing.   Insert-> Parking->Car-L/ Car-S/ Scooter/ Visitor Parking (Car) /Loading Unloading PK
_Passage     Draw a closed polyline on “_Passage” Layer to represent passage with Centre Line (Ltype-CentreLine) & single text inside it. (Note: If Premium for Passage is going to be Paid, Passage should be marked by using Tool “Mark ”   Mark > Passage > covered Passage.> Free from FSI or Taken in FSI. Mark > Passage > Open Corridor   PAS
_PlotBoundary   Draw a closed poly which will represent the Plot of the proposal. For proposed development, polys drawn on _PlotBoundary layer are those on which either amalgamation or subdivision is to be done.     PLT
_Pathway Draw a closed polyline on “_Pathway” to represent a pathway with text specifying its width 1.5 m wide Pathway. R6
_Podium Draw a closed polyline on “_Podium“ to represent Podium. It should be shown in the layout and not in floor plans.     POD
_PropWork PWork is a building profile and shall be drawn inside plot. Draw a closed polyline for Proposed Work on “_PropWork” Layer.   Tools > Assign Name > Building and PropWork. PW
_RecreationalGnd Draw a closed polyline on “_RecreationalGnd” Layer to represent area reserved as recreational space.     OPS
_RailLine Railway line shall be drawn in the layout plan as a Open Poly & Text which insertion point lies on the Polyline. (Note: Railway Gauge must be written at a starting of Text)   __ Meter Gauge Railway Line L2
_Ramp   Draw a Ramp as a closed polyline with Centreline (L-type-Centre) & Text inside it in Plan.   10.0m long 1.5m high Ramp SECR
_RefugeArea   A closed polyline with Text around the refuge area should be drawn on same Layer. Refuge area should be outside overlapped with FSI (ResiFSI, CommFSI) poly. (Inside Refuse area layer no need to draw Carpet/rooms/doors/windows etc.)     RFG
_ResiFSI Draw a ResiFSI as a closed polyline which is the area covered by a building on all the floors. This FSI polyline only  used for residential use bldg or floor.   No need to give name on this layer. MFS
_ReservArea If there in any Reservation Area in Plot, it should be drawn as a closed Polyline with Text inside same Layer.     RSA
_RoadWidening Road Acquisition/Road Widening area shall be drawn as a closed Polyline with Text on same layer inside Plot Entity. Margin will be generated & checked from Roadwidening Poly by AutoDCR software.     R5
_RightOfWay Draw a closed polyline on “_RightOfWay” to represent a Right Of way. It should be inside or intersecting with PlotBoundary poly.   3.0 m wide right of way ROW
_Room A closed polyline for each room with its text inside should be drawn on this layer. Text should be given using <Assign Name> function   Assign Name > Room RU
_Section Section poly should be drawn as a closed Polyline with Text on same Layer. It is used to group all Sectional detail like FloorInSection, Plinth, Stair cabin , Tank , Lift etc. (This is just a logical Group of Sectional Entity). (Note: Area or size of Floor doesn’t have any meaning in AutoDCR)     SEC
_SitePlan   The encapsulating poly around the Site/Key Plan with the Text & Scale inside it.     STP
_Sanitation Draw any sanitation entities on this layer . ( e.g. Water closet , Kitchen sink etc..) Mark that entities by using sanitation text from insert menu.   Inset > Sanitation Text.-> Washbasin , Urinal etc. SND
_Sewageline Sewage line shall be drawn as an open polyline on this layer.         SL
_StairCase Total Staircase area should be drawn as a closed polyline with text inside it. This Main Stair Poly should contain Intermediate Landing , Floor Landing & Each Tread as an open polyline. Intermediate & Floor Landing Poly can be Marked by PreDCR Tool “Mark>Staircase>Int. or Floor Landing” (Note: If Premium for Staircase is going to be Paid, Staircase should be marked by using Tool “Mark>Staircase>Free from FSI”   Mark-> Stair Case-> No Of Flight-> 3 flight / 4 Flight   Mark-> Stair Case-> Fire Escape Staircase OR Fab/Spiral Stair   Mark-> Staircase Landing-> Flight Width , Intermediate & Floor Landing STR
_SpecialUseFSI A closed poly represents a other than Residential , commercial or Industrial use FSI or Floor FSI. It will cover whole area which is considered in FSI Area per Floor.     SUF
_SubDivision In Subdivision one plot  is divided into more than one Subdivisions.
All entities having subdivision as their container entity should be uniquely present in all Subdivisions of a Plot i.e. suppose there is a road widening in the Plot then the poly of road widening should be different for each Subdivision( subdivided plot).
  SBD
_SubStructure SubStructures which are allowed in Margins or Layout & Free from FSI should be drawn as a closed polyline with text inside it. Name of the SubStructure can be assigned from Mark>SubStructure tool. SSTR
_SurrenderToCorp In case of accommodation reservation, the plot area or FSI to be surrendered to NMC is to be drawn on This layer. With text inside it.      
_Tank Tank clear size should be drawn as a closed Polyline with Text on this Layer in Floor Plan or Plot as well as Section with same Text. (Note: It should be in proper Naming convention which is Provide by Predcr by using Tool.   Assign Name>Tank  TNK
_Terrace Closed Polylines around the terraces to be drawn on this layer (including with parapet wall)       TER
_Tree If any Tree is present inside the plot then insert that tree by using insert option. Insert-> Tree TR
TempStructures Close Poly around temp structure with text, Temp. Structures should be inside plot.   TMPSTR
_UpperSetBack Draw a closed polyline in plan as well as in proposed work which having upper setbacks.   Mark-> Upper Set Back-> First OR Second USB
_VentilationShaft Draw Ventilation shaft/duct area as a closed Polyline with Text. Inside FSIArea on _VentilationShaft Layer. Only those shafts from which ventilation for habitable room is not taken should be drawn on this layer.     AVD
_Void If the space is not Chowk then it can be void. All ducts (where ventilation is not taken) and double height rooms can be drawn in void layer.     VD
_WaterLine Draw a open polyline on “_WaterLine” to represent water lines.   L4
_Window Draw a closed polyline on _Window” Layer to represent window. You can also use Insert tool to insert window poly for particular size. Insert > window WND
Categories: Predcr

Leave a Reply

Your email address will not be published. Required fields are marked *